how to install power pole guy wire anchors system

Stay insulator(or egg insulator) An insulator at a stay wire or guy wire is under pressure if its connected at both ends.

The cables bear a high tension, so for industrial purposes, the cable consists of wires of galvanized steel, which makes the guy wires extremely strong.

Why is it called guy wire The guy derives from a Dutch word, gei, which was a rope used to fix a furled sail to a mast.

When it came to any line and used to keep something stable, it was also named strand wire, stay wire, guy strand, guy cable, guy anchors, sometimes mistakenly called guide wire (The word guide is of French origin which has nothing to do with guy wire).

Guy (red arrow), controlling the spinnaker pole How is a guy wire used A guy wire is designed to transfer some of the weight of the structures to the ground.

It is used to support kinds of electric poles and towers in the power system, or hold up aerial masts for broadcasting and communications.

Because of the enormous tension stress of utility lines between the poles or towers, on the opposite side, guy wires are connected from the pole to the ground to support the unbalanced lateral loads, make sure the structures be straight, and prevent the ground from moving.

Utility pole guy wire Note: A guy wire is usually used with a guy set, which is insulated to avoid electric shock if any person touches it.

For telecommunications and broadcasting Guy wires used to support the telephone pole or antenna mast are about the same as they are for the power system.

Guy Wire Fittings Guy wire is designed to use with several fittings and components for some different applications, and they are used together to provide stability to towers, antennas, and other utility structures.

Dead End Grip According to the program, the dead end grip comprises guy wire dead end grips, preformed dead end grip used on the conductor, and preformed grip.

The guy wire preforms join the anchor rod or insulator to achieve the use of setting the pole.

Guy Grip The guy grip has formed legs using grits on each turn that retains the messenger conductor wire or fiber optic cable securely.

The guy grip is also known as the guy grip end or preformed guy grip, its used to link and traction grounding cable, the conductor, and the optical fiber program.

It used along with the stay wire and anchor rod to generate the pole securely.

After the stay wire goes around the anchor rod, the 3 bolt clamp bites the close of the stay wire to protect against the stay wire from slipping down.

The grooves of this guy clamp the stay wire, and the bolt will secure two pieces of guy clamp clamping the stay wire.

Guy Thimble Guy thimble is also called cable thimble, and it is accessible on the electric power line or dead-end pole line.

The cable thimble connects using all the preformed tension clamp to help and safeguard the ADSSOPGW cable.

Pole Band Pole band is also a fitting utilized together with the guy wire.

According to the arrangement, the pole band incorporates a single offset pole band and a double offset pole band.

According to the program, you will find utility pole bands, telephone pole brackets, and cable pole band.

Pole Top Make Off Pole top makes off is used as a clamp on the top of the power pole, it replaces the wedge clamp and firms the pole on the earth.

How To Install Power Pole Guy Wire Anchors System